Post for Mesh up to 1800mm

Thank you for the enquiry. The posts are tubular in shape, and have a 50mm diameter.

I think that I understand what you are trying to do with the compost bins i.e. the 3 bins are joined together, and share the internal mesh walls. The way our post system works is that each post has a spine running down its length which the mesh is then clipped onto. This can be tricky with a corner, as the spine can only face in one direction which is normally parallel to the fence line. The two options for making the posts work for a corner are as follows: 1.) You can use two separate posts and butt them up against each other i.e. you are treating each section as a separate straight run of fencing; 2.) You can bend the mesh into a 90 degree angle at the point of the direction change, and then clip one side of the mesh to the post.

In terms of the two internal runs of mesh, I think that these will need to be treated as two separate runs butted up to the main run of fencing at the back of the bins. You only need to use End Posts if you intend to tension line wire (as the end post comes with a strut, brackets and winders to enable the tensioning of the wire). If your mesh does not require the support of line wire, then you can just use the intermediate posts. These will need to be buried into the ground, and ideally postcreted in.

If any of the above is unclear, please feel free to call me on 01782 820 970.