Please wait...
BSSA
British Stainless
Steel Association
Our auto loading Hog Ring Pliers and single clip Hog Ring Tool are Swedish made hand tools designed to secure a steel ringlet (hog ring) over two pieces of wire. Therefore, these tools are perfect for attaching wire mesh and chicken wire netting onto tensioned line wire, and for connecting or joining wire mesh. The V16 hog rings (small) will close to any diameter between 2mm and 8mm.
The auto loading Hog Ring Pliers have the advantage of a spring loading magazine, which automatically loads the hog rings into the jaw of the tool. Please note that due to the width of the magazine, this tool is suitable for use on 25mm (1 inch) hole mesh and bigger. For mesh with a smaller hole, you should use the single Hog Ring Tool, which is designed with a groove in the jaw to enable you to manually load each hog ring into the tool individually.
Are the FP222 hog ring pliers suitable for joining two pieces of 16 gauge PVC coated wire? thanks
Thank you for your enquiry.
We would suggest using the hog ring plier for small rings or If you need the wires to be very tight together you could use either line wire or stainless steel cable ties.
Thanks.
Excellent service
Thank you for your helpful advice and efficient service.